Queen Acrylic Powder White Bride 50 g- Purple

Queen Acrylic Powder White Bride Purple is an acrylic powder that reacts with a liquid monomer to initiate polymerization, hardening naturally in the air after application, with no need for a light source. The formula was developed to provide a working time that allows for shaping and adjusting the extension before it fully hardens, facilitating the construction of the stress curve and cuticle area with precise control.

The product is compatible with tip systems and paper or metal forms, and is equally suitable for fill-in maintenance and structural corrections on previously built nails.

1. File the surface of the natural nail with a 180-grit file to remove the shine. Do not use a buffer or block at this stage.
2. Apply the SOS Primer and let it air dry for 30 to 60 seconds.
3. Apply the Bond Promoter and let it air dry for 30 to 60 seconds.
4. Dip the brush into the monomer and remove the excess. Touch only the tip of the brush to the acrylic powder and drag it towards you to form a bead.
5. Start the application in the middle of the free edge of the extension with the brush parallel to the nail plate. Apply light pressure to flatten the bead and shape the acrylic.
6. Repeat the process in the stress zone with a slightly larger bead and finish in the cuticle area with a smaller bead. Wait for air polymerization.
7. Proceed to file for final shaping. Do not use a buffer or polisher to avoid creating a surface that is too polished.
8. If desired, apply colored gel polish and cure under LED for 60 to 120 seconds.
9. Apply the desired top coat and cure under LED or UV for 60 to 120 seconds.